Search This Blog

Flippin' Junk

Pages

Home
About Me
Projects

More…

Posts

Showing posts with the label epoxyartwork

Show all

Epoxy Art - Seahawks

Get link
Facebook
X
Pinterest
Email
Other Apps

January 16, 2018

New Epoxy Top for a Struggling Ikea Table

January 05, 2018

I started with an Ikea table from work that someone sat on and accidentally broke one of the legs. The table was likely going to get thrown out, but I rescued it, fixed the leg, and totally transformed the boring beige coffee table. I believe it was this table in tan from Ikea: Above, you can see the underside of the table with the legs removed. The top right corner is where the leg folded and broke the particle board. I put the piece back in place with some wood glue and left it clamped overnight. Next I added some wooden trim around the entire base to make it more sturdy. The legs have screws that protrude out of the top, and the whole leg is rotated to screw it on to the table. In order to screw the legs back in, I needed to drill holes through the trim that lined up with the existing holes in the table. When I epoxy a table top, I round the edges of the table top so that the epoxy can run over the sides. I couldn't sand the ...

Porch Swing

April 30, 2018

I built this porch swing because my wife wanted a place that we could sit and watch the kids when they're playing in the front yard. It's not as comfortable as I would have hoped, but I think it turned out great for the space. The framing is built from pressure treated lumber, and the bench slats are made from pine. I made the frame first, from 4x4's and some 2x6's for support. I used 8" bolts to connect the 4x4 pieces, which actually felt like it would have held together without any lumber for structural support. I didn't want to risk my wife and I falling on our rear-ends the first time we sat in the swing though :-P To make the bench, I freehand drew an 'S' curve in a 2x6 to create the shape I wanted in the bottom of the bench. I made two more copies of that to provide the frame for connecting the pine slats. It just so happened that the other side of that 'S' worked out for the back of the bench. I connected them with 2...

Epoxy River Coffee Table

April 16, 2018

There are lots of people out there making some amazing epoxy river tables that sell for thousands of dollars. They generally use live edge slabs of specialty wood that can cost $1000+ alone, not to mention the tables sometimes contain $500+ of epoxy as well. I wanted to try to make a low-cost version of one of these amazing tables. I spent: $16.00 (2) 2" x 6" x 96" fir construction lumber $28 (2) 1/8" x 2" x 72" flat steel ~$17.50 32oz of a one-gallon kit 2-part epoxy ~$15 finish, paint, screws, etc. That brings me out to a total of roughly $76. First I used a biscuit joiner to align and glue (4) 4-foot lengths of the construction lumber together to form the table top. I let the glue dry for a few days before taking it out of the clamps, and filling any remaining gaps with clear epoxy. I put some parchment paper down between the center support to prevent the epoxy from sticking. The center support board is to prevent the ta...